• Skip to content
  • Jump to main navigation and login

Nav view search

Navigation

Search

Logo
You are here: Home FAQ Radio Control

Main Menu

  • Home
  • Mawson Lakes Regatta
  • Club Rules
  • Merchandise
  • News Archive
  • Rygged Start
  • Weather
  • FAQ
    • Radio Control
    • Sails
    • Construction
  • Links
  • Where are we
  • Contact Us
Display # 
Title Hits
Should I leave the antenna hanging out the back of the boat or wrap/fold/cut it? 121
When my transmitter is off, my servos act crazy. What's wrong? 140
Can I use 6v (5 cell) receiver packs with my receiver/servos? Will I get increased performance from my equipment? Are there any drawbacks to using 6 volts? 113
Can I use a receiver with a different number of channels than my transmitter (ex: 4ch Rx with 8ch Tx)? What about with the synthesized transmitter module/synthesized receiver? 125
Is it OK to let my antenna touch the push-rods, servo leads, etc? 106
My model's servos shake or 'jitter' whenever I get my transmitter really close to the model, especially if my antenna is up. What's wrong? 143
Can I use a single conversion receiver with a transmitter which shipped with a dual conversion receiver? 108
Can I use a transmitter crystal in the receiver or vice versa? 111
Can my old AM radio be converted to FM? 189
I have an 8 channel receiver but it only has 8 slots. How do I use 8 servos and plug in my receiver battery? 124
  • Start
  • Prev
  • 1
  • 2
  • Next
  • End

Powered by Joomla!®